Hello, welcome to visit.Nanjing Jiacheng Machinery Co., Ltd. website!
News center News Center
contact more +

The contact:Mr. Li
The phone:025-5272 9652
Mobile phone:13851554922
Address:No.82, feitian avenue, airport development zone, lukou, nanjing.
email:JCTRADEykx@163.com

News center

Inspection time of twin screw granulator.

The release date:2018-01-03
The time interval
Check/maintain the site.
Daily
Check temperature, pressure control and heating system during operation.
Check the tail seal of the screw when the equipment is running (FIG. 10)
Adjust and replace if necessary.
Every 2,000 hours.
Check the installation and function of the heater and whether the screw is loose.
If necessary, check all heating and cooling lines, exhaust devices, flanges and valves for leakage. How is the seal condition?
Check the screw tail seal (FIG. 10) when the device is running, and adjust or replace it properly if necessary.
Check temperature and pressure control device during operation.
It runs for 6,000 hours.
Pull out the screw, the threaded element and back cap are removed, check their wear, corrosion and damage, and replace damaged parts. Special high temperature mounting oil is used to reinstall thread elements.
Check the temperature and pressure control device.
Replace the seal ring
Remove the heater, clean the connection surface and then reinstall and check its function to ensure the installation is suitable, and the installation is special high temperature grease.
Check the heating and cooling connection pipes, the exhaust device, flanges and valves are leaking, and the sealing condition is good.

Relevant tags:
The contact:Mr. Li
The phone:025-5272 9652
Mobile phone:13851554922
email:JCTRADEykx@163.com
address:No.82, feitian avenue, airport development zone, lukou, nanjing.

Copyright © Nanjing Jiacheng Machinery Co., Ltd. All rights reserved备案号:ABCDEFGH

The public micro letter